Not all slides are created equally — a slide created for a backyard playground is not meant to set up with a swimming pool, even when slide is cooled. Likewise, slides designed particularly for in-ground pools are not always safe for above-ground pools. The type of slide you may use with your above-ground pool depends upon the deck or surroundings around the pool and also the available space; using another sort of slide may present a safety risk.
Compliance with Safety Standards
All pool slides, whether for in-ground or above-ground usage, need to meet standards determined by the U.S. Consumer Product Safety Commission. Start looking for a seal or wording on the literature indicating the slide does meet these standards. Slides that were tested by an independent agency should have documentation attesting to the fact; ask the retailer if unsure. Bypass any slide that doesn’t bear proof of compliance with safety codes, as they may not be entirely safe.
A good deal of accessible pool slides are developed for in-ground pools, because they may be permanently attached in cement. One kind of slide created for use having an icy pool is created specifically for mounting to a sturdy hardwood deck. Consult the owner’s manual to find out how the slide closes and whether your deck meets the requirements required to bear the load of a slide securely; additional mounting hardware may be required if it is not included with the pool purchase. Several deck-mounted slides, as well as some other varieties, have a built-in streaming water feature to help avoid users from sticking to this slide.
The owner’s manual for any pool slide includes a recommended minimum depth for the water at the slide’s exit stage, dependent on the angle of water entrance and typical rate of slide users. The water might be shallower within an above-ground pool compared to the deep end of the in-ground pool, so a slide created for deep-water use is not safe for a shallow above-ground pool. Local regulations may also come into play concerning the water depth and slide use; check the neighborhood jurisdiction’s website or telephone the building department for specifics. To get a somewhat shallow pool, a side-mounted slide might be an alternative; this kind of slide mounts halfway outside the pool, halfway inside, using a ladder that leads from the water to a platform above the rim of the pool, followed by more rungs leading to the peak of the slide. Such a slide might not be suitable for a semi-permanent or mobile above-ground pool using a thin lining.
If you’ve discovered an icy pool slide or two harmonious with your pool, space has turned into a key consideration. Each slide demands a specific amount of distance past the ladder to the bottom tip of the slide; the owner’s manual spells out this in detail. If the slide turns, a right or left turn directly impacts where you might be able to install the slide in your pool, dependent on the distance around it. Browse all documentation thoroughly to make sure your deck and pool depth are harmonious with the slide. A slide that installs in the Landscaping design Chico rather than on the deck is an option if the deck area is not large enough for deck-mounted slides. This kind of slide often requires setting the slide’s rear legs or posts in cement. When some versions extend mostly straight out, like an old-fashioned playground slide, others are designed to economize space together with the period of the slide running almost parallel to the pool, curving at the finish over the pool’s rim.