Renovating a small space can be quite a difficult task regardless of which area of the property you’re focusing on, but bathrooms are especially challenging because you’re required to combine efficiency with comfort and elegance while creating the illusion of space throughout the room.
Below are some useful tips on how to successfully and effortlessly update a small bathroom, even if it’s your first time doing handyman Cape Coral FL.
Consult with a Professional
Most people aren’t qualified enough to do all the tasks involved in bathroom remodeling, so it helps to outsource some of the more technical aspects of the remodel such as plumbing and electrification to professionals that already know what they’re doing. This will enable you to complete the remodel faster and more efficiently while preventing any possible return jobs.
Get a Permit
It is essential that you get a permit before you get started on your handyman Cape Coral project so that you’re aware of what you’re allowed to do before you start.
Make a Budget
Determine your budget early on so that you know what you’re working with when the time to choose materials and accessories for the remodel comes.
Fur Out the Window
Size the window panel from a glass block by measuring the jagged opening of the existing window and subtracting two inches from the measured length and width to get the correct frame size needed for the glass block panel.
Tear Out Plumbing
While it’s probably a good idea to get a professional to do this for you, it is possible to tear out the old plumbing yourself. First, you’ll have to switch off the water supply and then begin by cutting the pipes used to supply hot and cold water, followed by all the water lines and bathrooms fittings that you have.
Your final step is to get rid of the vent section which leads to the sink and close up any open drain lines by inserting rages in order to avoid the unpleasant smell of sewer gas from seeping into the house through these vents.
Insert New Plumbing
Out with the old, in with the new. Once the old and ineffective plumbing has been taken out, you can insert new plumbing by first attaching the shower vent in an appropriate position. The drain should be connected to the main sink, while the chair carrier should be fitted with the front part opposite the studs.
Install the Toilet and Shower
Our Cape Coral handyman tips wouldn’t be complete without doing the shower and toilet. Start by connecting the base of the shower to the shower drain using galvanized drywall screws that measure 1 to 5/8 inches. Then, fine-tune the chair carrier’s position so that it fits perfectly with the rest of the framework.
Tile the Walls and Floor
When installing tiling, start with the walls first and then follow with the floor, and fully seal around the windows with some silicone caulk, while ensuring to properly grout the tile for a beautiful smooth finish.