Is There a Alternative for Latex Backing on Drapes?

19 Nov

Is There a Alternative for Latex Backing on Drapes?

Thermal window treatments come in two varieties: those with latex applied directly to the fabric and those with separate hydrogen linings sewn in position. When the former’s latex backing begins to peel and crack, several products make patching the damage easy. But when the latex is heavily marred, addressing it using the lining used in comparable thermal drapes restores your own window treatments.

Ideal Patching Products

Liquid latex, sold in craft stores as a capital for carpets, can fix the latex already in your drapes, acting as a quick patching product. Silicone or latex caulk also repairs cracked or worn drapery backing similarly, creating a flexible layer. For windows that have a good deal of natural light, either caulk functions best, standing well to ultraviolet rays. Colored liquid latex, often sold in costume stores, can also do the job for coloured latex backings on drapes after smoothing the surface of their drapes with the velvet without adding mass. But these goods are more watery than craft-store liquid latex for rugs and may be hard to utilize. After patching the drapes, stick to air drying after washing; the heat from the dryer often melts these products.

Strategies For Seamless Repairs

Pick a patching merchandise in the exact same colour as the existing latex in your drapes; whitened looks most commonly, but you may encounter beige, gray or some other colour. For nonwhite backing, clear or transparent caulk, rug-backing latex, or a coloured liquid latex, permit for the most inconspicuous repair. Put the panels flat to a large work surface and then pin down the corners before program. Patching the lining once the drapes are wrinkled may cause creases to set permanently. Remove any loose particles and then implement your patching product of choice onto the damaged area with a foam brush, keeping the coat thin and combining the edges with the present layer. Add additional thin coats as necessary and allow the latex to completely cure — following the directions on the container — before rehanging the drapes.

Acrylic Lining

Comprised of a fabric foundation and one to three coats of acrylic, replacing linings cover latex that’s too damaged to adequately patch. Light- and medium-weight acrylic lining, labeled as one-pass and two-pass, absorbs light and sound whilst hiding damage and adding weight to curtains. Blackout lining, sold as three-pass, functions best in bedrooms and spaces with televisions. Because it’s thicker than one- and two-pass lining, it adds considerable weight to the drapes; when the existing latex backing remains in position, the addition of blackout lining alters the way the window treatments hang. Preview the effects by pinning three-pass lining to the rear of your drapes and hanging them first, noting how they fall.

Installing New Drapery Lining

When acrylic lining is used during the first creation of draperies, it melds seamlessly with the face fabric, giving the look of one piece. Securing lining above an present panel is simple yet not quite as flawless, but once hung the difference is not noticeable. Assess the rear of the drapes, noting that the width and the height of their latex-covered places. Cut the lining 2-inches taller and wider. The acrylic coating on the lining prevents fraying after cutting down, however, when dealing with large amounts of fabric, cutting a straight line is not easy, and hemming the fabric provides you a crisp edge. Hem the new lining 1-inch on all four sides and fasten it to the rear of the curtain with no-sew glue or by using a sewing machine. The latter will show another stitch on the surface of the curtain, however, the right color thread makes it possible for the repair to blend in.