Options for Installing Ductwork in Low Ceilings
Managing heat and heat air ducts at a room with a very low ceiling is a struggle. Your options for resolving the issue range from moving or modifying your current ductwork to adding a new system with more convenient ducting demands. In any case, making modifications to ductwork can potentially have a negative effect on your entire Sacramento AC repair specialists system, thus always consult an HVAC Boston repair specialists professional before you settle on an alternative.
Rerouting Ductwork
It may be possible that you transfer present ductwork so it provides more headroom where you want it most. In some cases, you might be able to relocate ducts from the bottom of ceiling joists into the spaces between the joists. If that’s not possible, consider moving ducts into the perimeter of the room, where they will be from the style of the majority of the room’s living space and traffic pattern.
Wider Ducts
Another option is to rebuild your ducts so that they are wider and flatter than the present ducts. Here, the objective is to install new ducts using the exact same interior volume as the previous ducts but with a lower profile which allows you to increase your ceiling height. A heating Sacramento repair specialists contractor can construct the ducts to get you and make sure the new duct layout can effectively deal with the Boston AC repair specialists and cooling loads of your house.
Mini-Split Systems
A mini-split system does not utilize conventional ducts, and it can be an effective option at a room with a very low ceiling. Mini-split systems contain an outside condenser and an indoor air handler that moves air in and out of this building. The air handler can be mounted on a wall or concealed behind a drop ceiling. Since the air handler is the only indoor component of the system, there is no requirement to get a network of ducts which would diminish your ceiling height throughout the space.
High-Velocity Systems
High-velocity HVAC Boston repair specialists systems are designed to move air continuously and effectively in comparison to a conventional system. The air-handling efficiency of high-velocity systems allow them to work with small, flexible duct tubing as little as 2 inches in diameter. The tiny ducts fit into spaces where large, stiff ducts can’t go, such as between and over joists and in walls.
